Answers are grounded in this paper and cite their sources.
Bulk SmCo5/α-Fe nanocomposite magnets have been prepared using a Joule-heating compaction technique. Nearly fully dense bulk magnets are obtained by compacting the milled powders under a pressure of 2 GPa at temperatures above 400 °C. Structural analysis shows that the grain size of both the SmCo5 and the α-Fe phases is in the range of 10 to 15 nm when the compaction temperature is lower than 500 °C, which ensures effective interphase exchange coupling. A further increase in compaction temperature leads to significant grain growth and deterioration of magnetic properties. A maximum energy product of about 18.5 MGOe was obtained in the bulk SmCo5/α-Fe nanocomposite magnets, which is 90% higher than that of the single-phase counterpart prepared under the same conditions.
No takes yet. Share an insight, caveat, or question.
Rong et al. (2011) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: