Answers are grounded in this paper and cite their sources.
It is well known that the surface architecture of an absorber has a significant effect on the final electromagnetic (EM) wave attenuation behavior. Herein, a series of nanoporous carbon media with different surface morphologies, including a honeycomb-like structure, three dimension (3D) interrelated network, and irregular lump shape, were obtained by a facile one-step strategy employing the green biomass of wheat flour as the precursor. By optimizing the surface architecture, it is demonstrated that the elaborate 3D interrelated skeleton makes a crucial contribution on the eventual EM absorption performance. At the identical low filler content of only 8 wt %, the nanoporous carbon media with a 3D interrelated skeleton shows the minmium reflection loss (RL min ) of −51 dB, almost 9 times higher than that of the other two nanoporous carbon media with honeycomb-like structures and irregular lump shapes. The corresponding effective frequency bandwidth ( f e, RL exceeding −10 dB) of 4.8 GHz was achieved at a thin thickness of 1.8 mm. Moreover, when slightly changing the mass percentage to 9 wt % in the paraffin matrix, the broad f e region of 6 GHz could cover the whole Ku band. This work provides a facile, sustainable, and low-cost approach for developing ultralight and highly efficient absorption media by means of a renewable biomass as te source, and the derived 3D carbon skeleton displays a great potential for dealing with EM interference.
No takes yet. Share an insight, caveat, or question.
Zhao et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: