We report the generation of a 266 nm deep ultraviolet (DUV) picosecond pulse with an average output power of 14 W by the fourth-harmonic generation (FHG) from two consecutive frequency-doubling stages of a 1064 nm pulse based on a gain-switched-laser-diode (LD)-seeded hybrid fiber/solid-state master oscillator and power amplifier (MOPA) system. Through the gain-switched operation of a narrow-spectral-linewidth distributed-feedback laser diode and by using a Yb-doped fiber and a two-stage N d : Y V O 4 solid-state amplifier, we achieved an average power of 46.5 W near the Fourier transform limit for a 13 ps pulse with a repetition rate of 200 kHz. The narrow linewidth pulse characteristics enabled highly efficient frequency conversion, and the efficiency of conversion from 532 to 266 nm was 54%, and from 1064 to 266 nm was 31%. The beam quality factor M 2 of the generated DUV pulse was below 1.2. The highly efficient FHG process resulted in appeasing thermal stress caused by nonlinear absorption in the crystal, and more than 5000 h of continuous operation were achieved without any power down or beam profile degradation.
No takes yet. Share an insight, caveat, or question.
Kohno et al. (2020) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: