Answers are grounded in this paper and cite their sources.
In order to prepare anode materials for high power lithium ion secondary batteries, carbon composites were fabricated with a mixture of petroleum pitch and coke (PC) and a mixture of petroleum pitch, coke, and natural graphite (PC-NG).Although natural graphite has a good reversible capacity, it has disadvantages of a sharp decrease in capacity during high rate charging and potential plateaus.This may cause difficulties in perceiving the capacity variations as a function of electrical potential.The coke anodes have advantages without potential plateaus and a high rate capability, but they have a low reversible capacity.With PC anode composites, the petroleum pitch/cokes mixture at 1:4 with heat treatment at 1000 o C (PC14-1000C) showed relatively high electrochemical properties.With PC-NG anode composites, the proper graphite contents were determined at 10~30 wt.%.The composites with a given content of natural graphite and remaining content of various petroleum pitch/cokes mixtures at 1:4~4:1 mass ratios were heated at 800~1200 o C. By increasing the content of petroleum pitch, reversible capacity increased, but a high rate capability decreased.For a given composition of carbonaceous composite, the discharge rate capability improved but the reversible capacity decreased with an increase in heat treatment temperature.The carbonaceous composites fabricated with a mixture of 30 wt.% natural graphite and 70 wt.%petroleum pitch/cokes mixture at 1:4 mass ratio and heat treated at 1000 o C showed relatively high electrochemical properties, of which the reversible capacity, initial efficiency, discharge rate capability (retention of discharge capacity in 10 C/0.2 C), and charge capacity at 5 C were 330 mAh/g, 79 %, 80 %, and 60 mAh/g, respectively.
No takes yet. Share an insight, caveat, or question.
고 et al. (2015) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: