This is the authors' abstract. We don't add key points for this paper.
This work focuses on the improvement of the mechanical properties of hydroxyapatite (HA) through the addition of 3 mol% yttria partially stabilized zirconia (PSZ). Enamel‐derived HA (EHA) from freshly extracted human teeth and commercial HA (CHA) were chosen as the matrix. The effects of addition up to 10 wt% of PSZ and of sintering temperature (1000°–1300°C) on the density, microhardness, and compression strength were evaluated. For EHA–PSZ composites, the density and mechanical properties were generally enhanced by adding 5 wt% PSZ, especially after sintering at 1200°C, whereas CHA–PSZ composites showed lower strength values at sintering temperatures of 1200° and 1300°C with respect to EHA–PSZ composites. This may be due to the lower stability of CHA–PSZ composites with higher amounts of calcium zirconate formed over 1100°C when compared with EHA–PSZ composites.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Erkmen et al. (2007) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: