Answers are grounded in this paper and cite their sources.
Clays, acid‐activated to an optimum level, have been pillared with alumina to give semi‐crystalline expanded materials with surface acidities, pore volumes and average pore diameters generally higher than those of the corresponding pillared materials derived from a clay matrix not previously acid‐activated. The chlorophyll adsorption capacity of the pillared acid‐activated materials is significantly greater than that of pillared, nonactivated clays. The procedures used in the preparation of these pillared acid‐activated clays (i.e., temperature of pillaring, method of drying and calcination temperature) have a significant influence on chlorophyll adsorption capacity because they influence both the physical and the chemical properties of the final pillared material. This variation provides a useful means of relating the various properties of the pillared materials to the chlorophyll adsorption capacity. As a result, a correlation has been demonstrated between adsorption capacity and a combination of pore volume and number of strong acid sites (of strength pKa < −1.5) present in the pillared material. Optimal adsorbents were obtained from freeze‐dried samples prepared by exchange at 20°C and calcination in air at 500°C.
No takes yet. Share an insight, caveat, or question.
Mokaya et al. (1993) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: