Answers are grounded in this paper and cite their sources.
In order to develop SiC/SiC ceramic matrix composites with a low porosity, liquid silicon infiltration (LSI) was chosen as a technique, characterized by short processing times. To create the matrix, a tailored phenolic resin containing ß-naphthol units was synthesized and infiltrated in wound fiber preforms, thermally cured, pyrolysed and siliconized. The aim is to obtain a high carbon yield during pyrolysis and to create a dense carbon foam between the SiC fibers. Instead of a classic liquid silicon infiltration via capillary forces through a carbon block-like microstructure, this foam promotes a softer infiltration with less fiber degradation and a maximized carbon conversion to near stoichiometric SiC. To protect the SiC fibers from an attack of the liquid silicon and to simultaneously provide a weak fiber matrix bonding, a BN x /SiN x fiber coating was chosen. The coating was applied by means of low-pressure chemical vapor deposition (LPCVD) using gaseous chlorine free precursors.
No takes yet. Share an insight, caveat, or question.
Mainzer et al. (2016) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: