Answers are grounded in this paper and cite their sources.
In this brief, a high-throughput and low-complexity fast Fourier transform (FFT) processor for wideband orthogonal frequency division multiplexing communication systems is presented. A new indexed-scaling method is proposed to reduce both the critical-path delay and hardware cost by employing shorter wordlength. Together with the mixed-radix multipath delay feedback structure, the proposed FFT processor can achieve very high throughput with low hardware cost. From analysis, it is shown that the proposed indexed-scaling method can save at least 11% memory utilizations compared to other state-of-the-art scaling algorithms. Also, a test chip of a 1.2 Gsample/s 2048-point FFT processor has been designed using UMC 90-nm 1P9M process with a core area of 0.97 mm2. The signal-to-quantization-noise ratio (SQNR) performance of this test chip is over 32.7 dB to support 16-QAM modulation and the power consumption is about 117 mW at 300 MHz. Compared to the fixed-point FFT processors, about 26% area and 28% power can be saved under the same throughput and SQNR specifications.
No takes yet. Share an insight, caveat, or question.
Yuan et al. (2008) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: