Answers are grounded in this paper and cite their sources.
To improve forest transportation efficiency, it is essential to maximize legal payloads and haul fully loaded on every trip from the forest to the mill. Accurate measurement of timber-load weight (and the corresponding volume) remains difficult in the woods: only a minority of loggers use in-woods scales, so most loads are still judged by ocular estimates. To assist in payload determination, we present a fully automated monocular video-based pipeline that requires only a consumer-grade camera. The pipeline combines image segmentation, Structure-from-Motion reconstruction, dense 3D modeling, marker-based scaling, and segmented volume estimation without requiring LiDAR or stereo hardware. Video frames are first segmented with a YOLOv11 model to isolate wood regions, then processed with COLMAP for sparse 3D reconstruction. The resulting point cloud is densified via 3D Gaussian splatting and converted into a surface mesh with SuGaR. Scale calibration is achieved by detecting small AR markers, enabling real-world volume estimates from consumer-grade imaging. To validate the method, we collected a multi-view dataset of 97 tree-length southern pine ( Pinus spp.) pulpwood and 98 tree-length southern pine sawtimber truck loads. Reference volumes were obtained by weight-to-volume conversion for pulpwood and direct log measurement for sawtimber. The proposed approach achieved mean absolute errors of 5.61% for pulpwood and 4.32% for sawtimber, with repeatability coefficients of 1.99% and 1.61%, respectively. Linear regression between predicted and reference volumes showed high fidelity, with slopes of 0.959 for pulpwood and 1.013 for sawtimber. These results indicate that the proposed pipeline provides a low-cost and practical alternative for roundwood truckload volume estimation.
No takes yet. Share an insight, caveat, or question.
Lin et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: