This is the authors' abstract. We don't add key points for this paper.
Membrane modification is commonly applied in water purification and wastewater treatment to reduce fouling of membranes. However, the influence of fouling test methods on evaluating pristine and modified membranes is often overlooked. This study investigates fouling behavior of alumina and SiC-deposited alumina membranes during oil-in-water emulsion filtration under both constant flux and constant transmembrane pressure conditions. Threshold flux was first determined using flux-stepping experiments, with the 90-minute SiC-deposited membrane showing the highest value at 95 L m -2 h -1 . In single-cycle constant flux tests, fouling trends aligned with threshold flux data. However, when backwash was included, fouling characteristics shifted and depended on the permeate flux. Enhanced hydrophilicity and surface charge improved backwash efficiency in modified membranes. Yet, extensive modification negatively affected performance due to significant permeance loss (>57%). Under constant pressure, fouling was dominated by internal pore blocking, and backwash efficiency was solely linked to membrane permeance, regardless of surface properties. Thus, constant flux filtration with backwash best reflects operational conditions and is recommended for evaluating membrane modifications. • The effect of surface properties on membrane fouling is not evident under constant pressure filtration • Trade-off between membrane permeance and surface properties is observed under constant flux filtration • Standard pore blocking and complete pore blocking are the main fouling mechanisms for constant pressure filtration • Intermediate pore blocking and cake layer filtration are the main fouling mechanisms for constant flux filtration
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Chen et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: