Answers are grounded in this paper and cite their sources.
A regular, deterministic, rough surface was tested at four velocities from 11 to 40 m/s, with and without blowing, to evaluate the Stanton number and friction factor characteristics. Hot-wire data were taken to document the turbulence components, the Reynolds stresses, and the turbulent heat flux. Data are presented concerning the streamwise development of the mean and fluctuating components, and the effect of blowing. Correlation coefficients and mixing lengths were deduced from the hot-wire data and are also presented. While the mean velocity data showed only two allowable states for the boundary layer (laminar and “fully rough”), the turbulence structure indicated a third: “transitionally rough”. Distributions of u′v′/uτ2 and v′t′/uτtτ are similar, except for high blowing (F = 0.004). The turbulent Prandtl number lies between 0.85 and 1.0 for the entire layer, and a mixing length constant of κ = 0.41 describes the data with good accuracy for all velocities and all values of blowing tested.
No takes yet. Share an insight, caveat, or question.
Pimenta et al. (1979) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: