Answers are grounded in this paper and cite their sources.
The dense uniformed joints between molybdenum disilicides (MoSi2) and stainless steel powders were prepared using the spark plasma sintering (SPS) technique with nine graded materials and their welding behavior was investigated. The results showed that such joints can be achieved using graded interlayers because the coefficient of thermal expansion (CTE) of each interlayer closely matched over a wide temperature range. Furthermore, the compatibility between the graded interlayers prevented MoSi2 with low toughness from the occurrence of microcracks resulted from the residual stresses formed during cooling of the joint. Moreover, the 9-layer joint with a thickness of 1.0 mm for each layer exhibited the minimum residual stress if the compositional exponent was 0.8.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2021) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: