Answers are grounded in this paper and cite their sources.
Ni-doped silica membranes of various Ni contents (Si/Ni = 0–1/1) were prepared on porous SiO2–ZrO2 composite intermediate layers (Si/Zr = 1/1) by the sol-gel techniques to test their hydrothermal stability and gas permeation characteristics in steam at high temperatures (steam: 90–400 kPa, 500°C). Preceding firing of the intermediate layer and the Ni-doped silica layer in steam at higher temperatures (steam: 90 kPa, 650°C) before exposed to hydrogen at high temperatures was found to drastically improve the hydrothermal stability of Ni-doped silica membranes in steam, showing, for example, a steady permeance of He around 1.7 × 10–5 [m3(STP)·m–2·s–1·kPa–1] with high selectivity of 1150 (He/N2) in steam (steam: 90 kPa, 500°C), which did not change largely even in steam of higher pressure (steam: 400 kPa, 500°C). It was also found that the membrane selectivity could be further improved with negligible decrease in H2-permeance by firing the membranes after impregnating dilute aqueous NiNO3 solution.
No takes yet. Share an insight, caveat, or question.
Kanezashi et al. (2005) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: