Top seeded melt growth of Gd–Ba–Cu–O single grain superconductors

Top seeded melt growth (TSMG) has been used extensively to fabricate large, single grain Y–Ba–Cu–O (YBCO) bulk superconductors that can trap large magnetic fields. The TSMG method is relatively economical and has enabled the development of batch processes for the fabrication of a large number of bulk single grain superconductors in a single furnace. In addition, the technique allows the fabrication of complex-shaped bulk samples with controlled and strongly connected grains by using a novel, multi-seeding process. A practical processing route for processing of LRE–Ba–Cu–O (where LRE represents a light rare earth element) single grain superconductors (which have superior properties to YBCO) has been developed at Cambridge over the past three years, based on the development of a generic seed of melt textured Mg-doped Nd-123 and suppression of solid solution phase formation in air by enriching the precursor composition with excess Ba. In this paper we report the successful application of a practical TSMG process in the fabrication of high performance Gd–Ba–Cu–O (GdBCO) single grain superconductor. This method has enabled the development of a batch process for GdBCO and we demonstrate for the first time the fabrication of a large number of high performance single grains of this material in a single process. Finally, we report the processing of bulk GdBCO in the form of complex geometries with controlled grain orientation for bespoke engineering applications.