This is the authors' abstract. We don't add key points for this paper.
Magnetron sputtered metal and metal compound films generally show very poor adhesion to PMMA; this limits the use of the polymer for components which are wear or scratch resistant or have a decorative finish. We have shown that adhesion could be significantly improved by a duplex process where a nanometer‐scale thickness adhesion layer of TiO2 or Al2O3 was deposited by low temperature atomic layer deposition (ALD) prior to magnetron sputtering. The metal precursors used for TiO2 and Al2O3 were TDMAT and TMA, respectively, and ozone was used as a source of oxygen in both processes. This process was followed by deposition of the metal/metal carbide layer using pulsed DC reactive magnetron sputtering. With the presence of the ALD adhesion layer, the pull‐off adhesion strength increased with its thickness until a point where the failure mechanism was due to cohesive disruption of the substrate material itself. It has been shown that the ALD deposited layers protect the PMMA against plasma damage during the sputtering process by blocking both direct ion damage and disruption of the polymer structure by ultra‐violet radiation. magnified image
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Kääriäinen et al. (2009) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: