Answers are grounded in this paper and cite their sources.
Time-resolved pressure measurements in a dual-mode scramjet isolator were examined to investigate the potential for using the measurements for shock train leading-edge detection. Changes in the pressure magnitude, standard deviation levels, and frequency content were observed as the shock train advanced upstream past each pressure measurement station. Three detection criteria were defined and examined: 1) 150% of the normalized pressure magnitude upstream of combustion influences, 2) 150% of the normalized pressure standard deviation level upstream of combustion influences, and 3) the maximum value of the normalized pressure standard deviation. Another method of shock train leading-edge detection involved the examination of the frequency content of the pressure signal using power spectra analysis. Results indicated that the second detection criterion provided the earliest method of shock train detection as the shock train moved upstream, followed by the first and third criteria. Also, the frequency content of the pressure signals significantly changed near the shock train leading edge. However, a comparison of this method to the three criteria first examined showed that it did not provide earlier shock train detection.
No takes yet. Share an insight, caveat, or question.
Le et al. (2008) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: