Answers are grounded in this paper and cite their sources.
Research aim is to estimate atmospheric pollution levels in the town of Apatity, by numerical simulation, depending on the discrete arrangement of dust sources at the tailing dump closest to the town and the speed of wind flow. Methodology. For computer 3D modeling, the COMSOL software was used. To calculate the aerodynamic properties the approach of incompressible fluid and standard (k–ε)-model of turbulence were used. The spread of dust pollution has been modeled by numerically solving the convective-diffusion equation of impurity transfer taking into account the deposition rate. Numerical experiments were performed for wind flow speeds between 5 and 23 m/s and a discrete representation of the dust source area between 2 and 10 ha. Results. The spatial distributions of the model's aerodynamic properties and the interval (and total) distributions of dust pollution were obtained. The Starye Apatity area is most exposed to atmospheric pollution. Atmospheric pollution levels were analyzed and generalized to functional dependencies, depending on the values of the model's variable parameters. It is shown that the calculated dependencies between the maximum dust concentration and the dust source area can be described by linear functions, which allows predicting the critical dust source area, at which the level of air pollution reaches the threshold limit value. It is demonstrated that the dependence of the maximum dust concentration on wind flow speed at fixed dust source area values can be approximated by a power-law function. Summary. A generalized analytical formula has been derived that allows predicting maximum dust concentrations in the town of Apatity depending on the discrete locations of dust sources at the tailing dump and the speed of wind flow.
No takes yet. Share an insight, caveat, or question.
Pavel et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: