Answers are grounded in this paper and cite their sources.
Process parameters were optimized via orthogonal experiments to fabricate micro-arc oxidation (MAO) coatings on 2198 Al-Li alloy in alkaline sodium silicate electrolyte. The micromorphology, elemental distribution, phase composition and elemental chemical states of the coating were characterized by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The corrosion resistance and corrosion failure behavior of the coating in 3.5 wt.% NaCl solution were analyzed via potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). The results showed that the MAO coating had an average thickness of 5.08 μm and presented a double-layer structure with a loose outer layer and a dense inner layer. It was composed of Al₂O₃, γ-Al₂O₃, boehmite (AlO(OH)) and mullite (Al₂O₃·SiO₂), while no Mg or Li was detected below the detection limit. The MAO coating reduced the corrosion current density of the substrate by about one order of magnitude and shifted the corrosion potential positively by 0.041 V. The EIS response could be interpreted as four stages: (i) coating barrier attenuation, (ii) corrosion product film barrier, (iii) mixed diffusion and coating-related control, (iv) appearance of inductive features. This study investigated the microstructure and corrosion behavior of MAO coatings on 2198 Al-Li alloy and provided a theoretical basis for the surface protection of the alloy.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: