Answers are grounded in this paper and cite their sources.
The increasing use of low-viscosity lubricants in order to reduce the friction in machine elements such as rolling bearings is leading to increased operation in the mixed or boundary lubrication regime. The associated wear can lead to an earlier failure of tribological systems. In this context, a detailed wear simulation offers great potential with regard to the design of machine elements as well as the calculation of lifetimes. This contribution presents an approach for the numerical wear simulation of lubricated rolling/sliding-contacts. Therefore, a finite element method-based simulation model was developed which is able to deal with non-Gaussian surfaces and contacts subject to boundary and mixed lubrication. Using the example of an axial cylindrical roller bearing considering realistic geometry, locally varying velocities, and two load cases, the wear modeling results of the mixed and the boundary lubrication regime were illustrated. The wear coefficient required for Archard’s wear model was determined experimentally by means of a two-disc tribometer.
No takes yet. Share an insight, caveat, or question.
Winkler et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: