Answers are grounded in this paper and cite their sources.
Drying is a process widely used in industries such as food and agriculture due to its importance in product preservation and processing. In this context, thin-layer models are required to accurately describe drying curves under both isothermal and non-isothermal conditions as a preliminary step in the design and optimization of drying methods. However, the formal derivation of these models and the assumptions on which they are based are not always evident, making both the physical interpretation of their parameters and the rational selection of a specific model more challenging. To address this gap, we developed a semi-theoretical thin-layer drying model derived from fundamental principles, incorporating an Arrhenius-type dependence on temperature and a linear relationship with moisture content for the mass transfer coefficient. The model was validated using experimental data obtained through thermogravimetric analysis under isothermal and non-isothermal conditions. Isothermal drying experiments were carried out at ambient temperature, while non-isothermal experiments were conducted at heating rates of 2.5, 5.0, and 10.0 K/min with corn dough samples at initial moisture contents of 2.0 and 2.3 kg/kg on a dry basis (d.b.), expressed in decimal form. The results showed that the proposed model satisfactorily described moisture ratio evolution in experiments at 5.0 and 10.0 K/min, which were not included in parameter estimation, achieving a root mean square error (RMSE) below 4.0% and a coefficient of determination (R2) above 99.4%. These findings demonstrate the robustness of the model and its potential for predicting thin-layer drying kinetics under non-isothermal conditions.
No takes yet. Share an insight, caveat, or question.
A 2025 study studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: