Answers are grounded in this paper and cite their sources.
Temperature and solar radiation have a noteworthy effect on the performance of the Photovoltaic (PV) panel. In this experimental study, two thermal management approaches were evaluated under identical operating conditions. One PV panel was cooled using circulating cupric oxide (CuO) nanofluid through a heat collector integrated with a helical heat exchanger, while the second panel employed passive aluminum fin cooling. The two cooling systems were examined based on their temperature behavior and electrical efficiency. The CuO nanofluid cooled PV panel operated at an average temperature of 32.5°C, lower than the 44.7°C recorded for the aluminium finned PV panel. Consequently, the CuO nanofluid cooled panel exhibited a higher gross average power output of 91 W compared to 85 W for the aluminum finned panel. Similarly, the PV panels integrated with aluminum fin cooling and CuO nanofluid cooling demonstrated average electrical efficiencies of 23.6% and 25.1%, respectively. Nevertheless, after accounting for the auxiliary power consumption of the 12 V circulating pump, the net electrical efficiency of the active CuO nanofluid cooling became comparable to that of the passive aluminum finned panel. Under the hot and dry climatic conditions of Kalaburagi, the passive aluminum fin cooling method showed beneficial thermal management capability without needing auxiliary power, rendering it a straightforward, economical, and energy efficient cooling solution for PV applications. Despite the active CuO nanofluid cooling system being relatively more expensive and intricate, it offered enhanced thermal management, significantly lowered PV operating temperature and improved the gross electrical performance under the same climatic conditions.
No takes yet. Share an insight, caveat, or question.
Abrar et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: