Answers are grounded in this paper and cite their sources.
By using a commercial β‐nucleating agent (TMB‐5) for polypropylene (PP), it was observed that high β‐crystal content in a compatibilized blend of polypropylene/polyamide‐6 (labeled as Blend‐03 in this work) can be achieved for samples prepared by compression moulding. As β‐PP possesses more superior impact strength then α‐PP, and the β to α transformation is an important mechanism of energy absorption for β‐PP, it is of obvious interest to understand the possibilities of β to α transformation in β‐polypropylene/polyamide‐6 blends. Tensile tests were performed at temperatures of 20, 30, 40, and 50 °C, and the occurrence of β to α transformation was monitored by differential scanning calorimeter and wide angle X‐ray diffraction measurements. It was observed that the β to α transformation in Blend‐03 could only be activated at elevated tensile testing temperatures. This was related to the increase in tensile elongation at break with the increase in tensile testing temperature.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2007) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: