Answers are grounded in this paper and cite their sources.
Graphene-doped polymer nanofibers are fabricated by taper drawing of solvated polyvinyl alcohol doped with liquid-phase exfoliated graphene flakes. Nanofibers drawn this way typically have diameters measured in hundreds of nanometers and lengths in tens of millimeters; they show excellent uniformity and surface smoothness for optical waveguiding. Owing to their tightly confined waveguiding behavior, light–matter interaction in these subwavelength-diameter nanofibers is significantly enhanced. Using approximately 1350-nm-wavelength femto-second pulses, we demonstrate saturable absorption behavior in these nanofibers with a saturation threshold down to 0.25 pJ pulse−1 (peak power ∼1.3 W). Additionally, using 1064-nm-wavelength nanosecond pulses as switching light, we show all-optical modulation of a 1550-nm-wavelength signal light guided along a single nanofiber with a switching peak power of ∼3.2 W. Graphene-doped polymer nanofibers have been used to perform low-threshold nonlinear switching and modulation of light. Chao Meng and co-workers fabricated the nanofibers by drawing a solvated polymer containing liquid-phase exfoliated graphene flakes. The resulting nanofibers typically had diameters of several hundred nanometers and lengths of tens of millimetres. The nanofibers’ tight confinement of light on the subwavelength scale enhances light–matter interactions and allows nonlinear effects such as saturable absorption to occur at low optical powers. Using 1064-nm-wavelength, nanosecond control pulses as a switch, a 1550-nm signal was all-optically modulated in the nanofiber with a switching peak power of about 3.2 W. The researchers say that the nanofibers feature excellent surface smoothness and uniformity and are promising for use in nanophotonic circuits and devices.
No takes yet. Share an insight, caveat, or question.
Meng et al. (2015) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: