This is the authors' abstract. We don't add key points for this paper.
Ti48Al2Cr2Nb alloys containing 0–2.0 wt% C were prepared by vacuum arc melting to investigate the effects of carbon on microstructure and mechanical properties. The results indicate that, carbon initially dissolves in the α 2 -Ti 3 Al and γ -TiAl matrices, causing lattice distortion; when C content exceeds its solubility limit (approximately 0.4 wt%), Ti 2 AlC precipitates. The average α 2 / γ lamellar colony size and average Ti 2 AlC aspect ratio decrease with increasing C content, while the volume fraction of Ti 2 AlC and its average grain size increases. Many mechanisms, such as solid-solution strengthening by C, grain refinement strengthening, and precipitation strengthening via Ti 2 AlC, influence the mechanical properties of Ti48Al2Cr2Nb-xC(wt%) alloys. Ti48Al2Cr2Nb-0.8C shows the best overall performance, with the highest hardness (452.4 HV), elevated tensile strength (342 MPa) and compressive strength (2091.8 MPa) at room temperature, and improved compressive strength at 800 °C (927 MPa).
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: