Wireless environments, high data rates and increased digitization require A/D converters with high dynamic range and large bandwidth at the lowest possible power consumption. A fully flexible continuous-time (CT) Δ Σ with programmable bandwidth, resolution and power consumption in 1.2 V 90 nm CMOS is presented able to satisfy those demands. By introducing flexibility into the core building blocks, a DR of 67/72/78/83 dB is achieved in maximum performance mode for WLAN, DVB, UMTS and BT for a power consumption of 6.8/5.5/6.4/5.0 mW, respectively. GSM operation is also feasible with a DR of 87 dB. For a given bandwidth, the flexibility allows to obtain the lowest power consumption for a desired performance. The overall energy efficiency is reached with a single-bit CT Δ Σ modulator avoiding high speed DEM circuits. Its low power consumption especially for high bandwidths is realized thanks to architecture and circuit level optimization. Linearity enhanced integrators, a threshold configurable comparator enabling loop delay compensation and optimized DAC implementations for jitter and avoiding signal dependency in the feedback pulses due to a large voltage swing are employed to increase the performance. The respective FOM equals 0.24/0.27/0.41/0.85 pJ per conversion.
No takes yet. Share an insight, caveat, or question.
Crombez et al. (2010) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: