Answers are grounded in this paper and cite their sources.
This paper presented the main objective characterization of cracks in welded joints of ferritic steels, since these are considered one of the most serious types of discontinuities in welds of these steels.These discontinuities are formed when tensile stresses are developed in a fragile material, unable to plastically deform the absorbing it.High tensile stresses are created and developed in the weld region as a result of thermal expansion and contractions located ( associated with non-uniform heating of the weld ), the volume changes due to phase transformations and as a result of links between pieces being welded and the rest of the structure.To induce cracking of the sample Varestraint test was used, as well as to measure the fracture toughness testing we performed Charpy Impact.However, in this study we observed that microfissures solidification in HAZ (heat affected zone), cracks in the center of the weld cracking due to thermal expansion and overhead imposed by the test were prevalent in these steels AISI/ASTM 430 specification.There was also the toughness of the weld proved always above to the base material.
No takes yet. Share an insight, caveat, or question.
Moreno et al. (2014) studied this question.
Synapse has enriched one related paper. Consider it for comparative context: