Answers are grounded in this paper and cite their sources.
Tungsten samples are exposed to 3He plasma to quantify their helium retention behavior. The retention saturates quickly with helium fluence and increases only slightly from 4.3 × 1019 He/m2 at 773 K, to 7.5 × 1019 He/m2 at 973 K. The helium content increases dramatically to 6.8 × 1020 He/m2 when fuzz is formed on the surface of a sample exposed at 1173 K, but the majority of the retained helium (5.1 × 1020 He/m2) is found to reside below the layer of fuzz tendrils. Additional tungsten samples were exposed to either simultaneous, or sequential, D/He plasma, followed by TDS. Measurements show the majority of the D retained during simultaneous exposures is located in the near surface region of helium nano-bubbles. No deuterium was detected in any of the samples after the heating to 1273 K, but 67% of the helium was released from simultaneously exposed samples, and only 23% of the helium was released from the sequentially exposed samples.
No takes yet. Share an insight, caveat, or question.
Doerner et al. (2016) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: