This is the authors' abstract. We don't add key points for this paper.
An amperometric dipyrone sensor based on a polymeric nickel-salen (salen = N,N ´-ethylene bis (salicydeneiminato)) film coated platinum electrode was developed. The sensor was constructed by electropolymerization of nickel-salen complex at a platinum electrode in acetonitrile/tetrabuthylamonium perchlorate by cyclic voltammetry. After cycling the modified electrode in a 0.50 mol L -1 KCl solution, the estimated surface concentration was found to be equal to 1.29 x 10 -9 mol cm -2 . This is a typical behavior of an electrode surface immobilized with a redox couple that can usually be considered as a reversible single-electron reduction/oxidation of the nickel(II)/nickel(III) couple. A plot of the anodic current versus the dipyrone concentration for chronoamperometry (potential fixed = +0.50 V) at the sensor was linear in the 4.7 x 10 -6 to 1.1 x 10 -4 mol L -1 concentration range and the concentration limit was 1.2 x 10 -6 mol L -1 . The proposed electrode is useful for the quality control and routine analysis of dipyrone in pharmaceutical formulations.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Teixeira et al. (2009) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: