Answers are grounded in this paper and cite their sources.
The effect of scan rate on the morphology and properties of polyaniline has been investigated for samples deposited electrochemically on nickel from sulfuric acid solution. A nanofibrilar network structure has been obtained for low scan rates (10, 25 and 50 mV s-1) whereas for the highest scan rate (100 mV s-1) the structure was more compact, the nanofibrils aggregated and their features were not very obvious. Both diameter and length of nanofibers are scan rate dependent, decreasing from 140 to 90 nm and from 1.35 to 0.72 μm when the scan rate is increased from 10 to 50 mV s-1. The nanofiber network tends to be more compact and with less free-volume as the scan rate is increased. Generally, high specific capacitances and low charge transfer resistance values are obtained for all nanofibrilar polyaniline films as compared to the compact structure. The optimum scan rate for deposition was found to be 25 mV s-1, leading to the highest specific capacitance and lowest charge transfer resistance.
No takes yet. Share an insight, caveat, or question.
Kellenberger et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: