Answers are grounded in this paper and cite their sources.
In this article, we demonstrate for the first time a mesoscopic printable perovskite solar cell (PSC) using NiO as the hole transporting material and low-temperature processed carbon as the counter electrode. A single deposition method assisted by N2 blow drying was used for the deposition of MAPbI3 on a TiO2/ZrO2/NiO screen-printed electrode. As the final step a low-temperature processing (i.e. 75 °C) carbon counter layer was fabricated on MAPbI3 by a blade coating method. It is found that the capping layer thickness of MAPbI3 has a significant effect on the device efficiency, especially when NiO is introduced as a hole transporting material into the structure. Electrochemical impedance spectroscopy demonstrates good charge transport characteristics for the device with a thin MAPbI3 capping layer obtained by the N2 blow drying method. Our best performing device demonstrated a remarkable photovoltaic performance with a short-circuit current density (Jsc) of 22.38 mA cm−2, an open circuit voltage (Voc) of 0.97 V, and a fill factor (FF) of 0.50 corresponding to a photo-conversion efficiency (PCE) of 10.83%. Moreover, the un-encapsulated device exhibited advantageous stability over 1000 h in air in the dark.
No takes yet. Share an insight, caveat, or question.
Peiris et al. (2017) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: