Answers are grounded in this paper and cite their sources.
This study addresses the reduction of residual stresses in rails for interoperable railway tracks with standard and enhanced operational properties, designed for the construction of high-speed and conventional-speed railway lines, characterized by very good flatness of the rolling surface and increased safety indicators resulting from a low level of residual magnetism. The article presents results of research aimed at reducing residual stresses in 120 m railway rails to comply with the requirements of the standard PN-EN 13674-1, that is, a maximum value of 155 MPa in the foot, 220 MPa in the head, and −200 MPa in the web of a rail. Numerical computations were used for designing set-ups of vertical and horizontal straighteners. Straightener and material models were developed and boundary conditions were established for stress calculations to be performed considering the selected set-ups, indicating the possibility of reaching stress levels as low as 120 MPa. The results of the calculated cases were verified by tensometer experimental measurements, which allowed the formulation of guidelines for reliable prediction of representative stress estimators in points of interest as an aid in selection of favorable set-ups of 9-roller straighteners.
No takes yet. Share an insight, caveat, or question.
Woźniak et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: