Answers are grounded in this paper and cite their sources.
This study investigates a U-shaped low-bend-loss single-mode fiber embedded in an elastomer pad and interrogated by optical frequency domain reflectometry (OFDR) for distributed deformation sensing. The OFDR measurements used a 2.6 mm gage pitch over an approximately 1.27 m measurement path. Steady-state strain was calculated from the final portions of the recorded signals for flat and spherical-indentation loading. In the single flat upward-loading test, mean P1 strain increased from 16.73 to 759.34 µε over nominal contact pressures of 5.09–20.37 MPa. A linear fit yielded an apparent slope of 48.07 µε/MPa (R 2 = 0.9817; four load levels). During continued loading between 400 and 500 N, the OFDR return disappeared, and post-test inspection confirmed sensor fracture; the exact fracture force was not recorded. In three curved-deformation cycles from 0 to 444.82 N, the loading-branch linear-fit slopes at P1–P5 ranged from 7.71 to 9.38 µε/N (R 2 = 0.941–0.956). The corresponding unloading fits gave R 2 = 0.925–0.996, and the maximum absolute hysteresis ranged from 22.8% to 42.6% of the loading full-scale strain span. These results demonstrate distributed, position-dependent strain mapping and indicate that loading history and time-dependent deformation of the packaged pad affect the measured response.
No takes yet. Share an insight, caveat, or question.
Cao et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: