Answers are grounded in this paper and cite their sources.
Surface peening is an essential technological process for enhancing the functional properties of engineering materials. Although various surface modification and functionalization treatments exist, methods such as abrasive water jets may contaminate the surface with abrasive artifacts embedded in the material. This problem can be overcome by utilizing the high-frequency hammer effect of a hybrid technology, an ultrasonic pulsating water jet. This abrasive-less water jet method does not require high supply pressures to overcome the material’s yield point. A key challenge with this technology is the efficient distribution of water droplets. Therefore, this study compares two methods of droplet distribution along Linear and CrissCross scanning trajectories. Surface topography, morphological evolution, subsurface microhardness, and wettability were evaluated. It has been found that the Linear strategy generated a rougher, anisotropic texture, while the CrissCross trajectory produced a smoother, highly isotropic surface. Subsurface microhardness increased by approximately 18% near the surface, with a gradient decrease to a depth of 200 μm for both strategies. Furthermore, PWJ treatment increased the apparent water contact angle and lowered the contact angle of non-polar liquid, therefore increasing the dispersive component of surface free energy. Controlled droplet distribution in PWJ can thus be utilized as a precise tool for surface functionalization and to enhance mechanical properties and wettability.
No takes yet. Share an insight, caveat, or question.
Nag et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: