This is the authors' abstract. We don't add key points for this paper.
In this paper, thermal buckling of doubly clamped microfabricated nickel beams is implemented as a passive actuation mechanism to drive temperature-regulated nonlinear micro-valves for adaptive microcooling applications. The nonlinear buckling phenomenon is combined with the nonlinear change in flow rate through parallel plates with a variable spacing. The thermal buckling mechanism and parallel plate flow are modeled analytically, and nondimensional characteristic design curves have been generated. Passive flow-control microvalves were fabricated using deep reactive ion etching and a through-mold nickel electroplating process over a thin sacrificial layer. The model is validated with experimental results from the microfabricated temperature-regulated microvalves. Experimental characterization using an integrated micromachined heat exchanger with air as the working fluid shows the desired nonlinear valving behavior with mass flow rates of up to 5 mg/s for a temperature increase of 50degC, corresponding to 0.25 W of heat removal. It is shown that temperature-induced elastic instabilities in microfabricated structures can be modeled and manipulated to create a nonlinear adaptive valving mechanism. The modeling approach, microfabrication process, and full characterization of the microvalves are presented.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
McCarthy et al. (2008) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: