Answers are grounded in this paper and cite their sources.
The applicator consists basically of a length of semirigid coaxial line cable (Americon) which is able to move along the inside of a hypodermic needle (Fig. 1). The cable is approximately 9.5 cm long and has an outer conductor with a diameter of 0.086 cm. The inner conductor has a diameter of 0.02 cm and projects 0.6 cm from one end of the cable (I, Fig. 1). The other end of the cable is soldered to a miniature plug A (Americon, ARMM series) which enables the applicator to be connected to a microwave generator operating at a frequency of 2.45 GHz. This connector (A) is supported on a brass collar B, connected to the piston C which is 2.3 cm long and 0.32 cm in diameter. The coaxial line cable is rigidly glued to the inside of C using an epoxy resin. The piston C moves inside a closely fitting cylinder F which has an external diameter of 0.71 cm and is 3.2 cm long.
No takes yet. Share an insight, caveat, or question.
Szwarnowski et al. (1980) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: