Answers are grounded in this paper and cite their sources.
This study presents the characterisation of a prototype thermoelectric generator including ceramic C a 3 C o 4 O 9 Ca₃Co₄O₉ p-type and metallic C u 0 . 57 N i 0 . 42 M n 0 . 01 Cu_0. 57Ni_0. 42Mn_0. 01 n-type legs. The generator was constructed applying the conventional rigid chessboard design, which provides an electrical series connection of the thermoelectrically active materials in between of two electrical isolating cover plates made of alumina. Ag-epoxy resin was used for electric connectors which were directly bond to the thermoelectrically active materials. The generator was rebuild in the framework of a finite-element model to simulate the generator’s transport characteristics using the physical data of the single materials as input parameters for the simulation tool. The simulation results give a view to the distributions of temperature and electric potential as well as vector plots showing the generated current density of charge inside the regarded materials. The finite-element simulation tool was used to consider the electrical contact resistivities between the thermoelectric legs and the connector material. The input parameter for the specific isothermal electric resistivity of the Ag-epoxy connectors were varied by including the electrical contact resistances to match the simulated to the measured data in order to receive the correct electric current densities in the modeled device.
No takes yet. Share an insight, caveat, or question.
Geppert et al. (2017) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: