Answers are grounded in this paper and cite their sources.
Be-Al alloy is a type of in situ metal matrix composite composed of a primary Be phase for strength and stiffness and a continuous Al matrix for ductility and toughness. Be-Al alloy (AlBe-Cast®910) has the characteristics of low density (2.17 g/cm3), high elastic modulus (193 GPa) and specific stiffness (88.94 GPa/(g/cm3)) as a preferred material for lightweight aerospace products. Investment casting technology can be employed to prepare the components with thin-walled complex structures for aerospace; however, the wide solidification range for Be-Al leads to difficulty in feeding a casting and results in extensive shrinkage and porosity in cast parts. In this paper, the characteristics of Be-Al alloy are introduced first. Secondly, the mechanisms of influence of adding elements on the casting process, mechanical properties (strength increases more than 20% by adding elements) and microstructure evolution are explained in detail. In addition, the heat treatment technology (strength increases at least 10% after heat treatment) and the repair of defects by electron beam welding are discussed. Finally, Be-Al alloy is a new type of composite material, and China is a major research and application country; this paper introduces its research status and analyzes existing problems and shortcomings and points out the direction of Be-Al alloy development in China in the next few years.
No takes yet. Share an insight, caveat, or question.
Li et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: