Answers are grounded in this paper and cite their sources.
Glued-in rods have succesfully been used for connections of reinforcement of timber structures due to their high strenght and stiffness. However, their performance is potentially sensitive to temperature. This paper deals with an experimental investigation of the connections and adhesives in elevated temperatures. First, dynamic mechanical analysis (DMA) tests were performedto characterize an epoxy (EPX) and a polyurethane (PUR) adhesive. The evolution of the stiffness and the glass transition temperature, Tg, were measured in the range of 30°C to 120°C. Then, a total of 66 specimens with glued-in rods and the same adhesives were tested under a static tensile load at 20°C, 40°C, 50°C, 60°C, and 70°C. In both types of tests, the EPX outperformed PUR due to its higer stiffness at temperatures of up tu 40°C; however, it showed a more rapid degradation of the stiffness and strenght than the PUR at higher temperatures. No direct correlation was established between the Tg and the performance of the connections. The test results suggest that timber structures with glued-in rods may be vulnerable in service at temperatures above 40°C.
No takes yet. Share an insight, caveat, or question.
Verdet et al. (2016) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: