Answers are grounded in this paper and cite their sources.
We present an optimized contacting scheme for multicrystalline silicon thin film solar cells on glass based on epitaxially crystallized emitters with a thin Al2O3 layer and a silver back reflector. In a first step a 6.5 µm thick amorphous silicon absorber layer is crystallized by a diode laser. In a second step a thin silicon emitter layer is epitaxially crystallized by an excimer laser. The emitter is covered by an Al2O3 layer with a thickness ranging from 1.0 nm to 2.5 nm, which passivates the surface and acts as a tunnel barrier. On top of the Al2O3 layer a 90–100 nm thick silver back reflector is deposited. The Al2O3 layer was found to have an optimal thickness of 1.5 nm resulting in solar cells with back reflector that achieve a maximum open‐circuit voltage of 567 mV, a short‐circuit current density of 27.9 mA/cm2, and an efficiency of 10.9%. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)
No takes yet. Share an insight, caveat, or question.
Gawlik et al. (2015) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: