Answers are grounded in this paper and cite their sources.
A low-profile ultrawideband antenna of circular polarization (CP) is proposed in this communication. This antenna consists of two layers of Rogers RT/Duroid 5880 PCB board of 0.79 mm thickness. The size of the top PCB is 54.6 mm ×54.6 mm, and four pairs of semicircular patches are printed on both its top and bottom sides. This top PCB is placed 10.5 mm above the bottom PCB, which is 95 mm ×95 mm in size. On the top side of the bottom PCB is a 1-to-4 microstrip feeding network with 90° phase difference between the adjacent ports, while the ground plane is on its bottom side. The top PCB is supported by four small trapezoid-shaped PCB boards at the center of its four edges, respectively. A slot line is printed on each trapezoidal PCB to feed the patches. Both the simulation and measurement results show that this low-profile antenna has a very wide 10 dB return loss bandwidth from 2.9 to 9 GHz. Meanwhile, lower than 3 dB axial ratio can be achieved from 3 to 7.8 GHz and its right-hand circular polarized (RHCP) gain is higher than 8 dBic. The good performance of this antenna can justify that it is a promising candidate for indoor positioning applications that require CP.
No takes yet. Share an insight, caveat, or question.
Tan et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: