Answers are grounded in this paper and cite their sources.
Computer-aided design/computer-aided manufacturing (CAD/CAM) systems have gained popularity over the traditional laboratory procedures in dentistry. In the conventional metal casting technique by burnout of a pattern, instead of using a wax pattern (which has several disadvantages), milled polymethyl methacrylate (PMMA) and 3D-printed resin patterns can also be used. The objective of the study was to assess and compare the marginal accuracy of single-crown cobalt–chromium (Co-Cr) metal copings fabricated using milled PMMA and 3D-printed resin patterns. Digital designing was done for metal coping on a prepared typodont mandibular molar using 3Shape Dental Design software. Standard Tessellation Language document of CAD design was used to fabricate 3D-printed resin patterns (Sprintray 3D printer) and milled PMMA patterns (CAD/CAM milling machine CoriTEC). A total of ten Co-Cr copings were casted, of which five belonged to Group A: 3D-printed resin and the other five to Group B: milled PMMA. The copings were assessed for marginal fit at eight different points using a stereomicroscope. Statistical analysis was done using an independent t -test. The t -test revealed a significant difference between the mean marginal gap values of the two groups, with the marginal gap values for the 3D-printed resin group (82.21 ± 15.26 μm) being lesser than that of the milled PMMA group (106.75 ± 12.76 μm). The marginal accuracy of copings fabricated using 3D-printed resin patterns was superior to that of copings fabricated from milled PMMA patterns.
No takes yet. Share an insight, caveat, or question.
Arora et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: