This is the authors' abstract. We don't add key points for this paper.
We herein report an investigation of graphene oxide (GO) thin layers fabricated by simple horizontal-dip (H-dip) coating on an indium-tin-oxide (ITO) anode as used in solution-processable organic semiconducting devices. Homogeneous and smooth GO thin films were successfully deposited via an aqueous dispersion of GO on an ITO electrode, with a high surface coverage and low surface roughness, and a thickness controlled by H-dip coating. The use of an H-dip-coated GO film as a hole-injecting interfacial layer (IFL) in organic light-emitting diodes (OLEDs) resulted in a remarkable improvement in device performance (17 cd A−1), better than that (12 cd A−1) of a reference OLED with a spin-coated GO IFL. Stacked bi-IFLs of GO/poly(ethylenedioxythiophene):poly(styrene sulfonate) (GO/PEDOT:PSS) fabricated by H-dip coating were also investigated as hole-injecting IFLs in OLEDs, and these showed an even better device performance (23 cd A−1). Furthermore, it was also shown that polymer solar cells with H-dip-coated GO/PEDOT:PSS hole-collecting bi-IFLs exhibited a remarkable improvement in power conversion efficiency (6.9%), which was also higher than that (4.8%) obtained with spin-coated bi-IFLs. These results clearly indicate that the H-dip-coating of GO(/PEDOT:PSS) can effectively modify the ITO interface to yield efficient hole-selective IFLs, representing considerable promise for use as an alternative to spin-coated IFLs in the mass production of solution-processable organic semiconducting devices.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Jeon et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: