This is the authors' abstract. We don't add key points for this paper.
Conventional mechanical characterization on rotated materials uses constant uniaxial force tool instead of a rotated machine with multiple applied forces. Such a simplification or replacement omits the complex condition of rotated materials and induce a serious deviation for failure analysis and life prediction on rotated materials, especially on key engine used materials. Rotational testing and experimental data provide direct experimental data and are more beneficial and accurate than the data obtained by simulation which is the most frequently used method for examining metallic rotating gears. Creep (under stable rotation) and fatigue (under frequent acceleration and deceleration) are the main degradation modes during high-speed rotation. Thus, a study on creep and fatigue behaviors and differences in rotated samples is necessary and important for applications. In this study, cracking and microstructural variation are studied via the high-speed rotation of 7075 aluminum slats to reveal the difference between creep and fatigue behaviors. The cracking difference between creep and fatigue can be attributed to the difference between the forces applied during the two processes. A reversed dominant torsional force during acceleration and deceleration exerts a force perpendicular to the neck direction in the fatigue mode, whereas the force during creep is mainly the centrifugal force along the neck. Finite element method calculations are carried out to obtain a full understanding of the stress and plastic deformation evolution on rotation slats. This study provides a convenient and practicable method for service safety testing and the characterization of industrial rotating machines and their raw alloys.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Chen et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: