Answers are grounded in this paper and cite their sources.
BACKGROUND: The purpose of this study is to compare a locked screw construct to a single iliosacral screw for fixation of a vertically unstable pelvic ring injury in a transforaminal sacral fracture model. METHODS: Orthopaedic Trauma Association type 61-C1.3a2c5 fractures were created in 10 fresh frozen cadaveric pelvis specimens. Specimens were divided into two groups of five. In both groups, the anterior ring was stabilized with a six-hole 3.5-mm reconstruction plate. In the locked plate (LP) group, the posterior injury was stabilized using a two-hole locking plate with one solid 5.0-mm locking iliosacral screw directed onto the S1 body and a second locking screw directed into the lateral sacral ala. In the iliosacral screw group, the posterior injury was stabilized using a single cannulated 7.3-mm screw. Testing was conducted on a Materials Testing System. Values for displacement and rotation were recorded. Each pelvis was axially loaded with a compressive sine wave from 175 N to 350 N for 10,000 cycles to simulate limited weight bearing, with data recorded at 1,000 cycle increments. RESULTS: Two specimens in the iliosacral screw group displaced more than 1 cm during the first 1,000 cycles. These two specimens displayed gross fracture motion in all planes. All five specimens in the LP group completed 10,000 cycles of testing with less than 1 cm of displacement. A vector displacement calculation from the plane displacement data revealed that the LP group had significantly less displacement (median 1.9 mm) than the specimens in the iliosacral group (median 6.7 mm; p = 0.008) after 10,000 cycles. CONCLUSIONS: A two-hole plate locked head screw construct resulted in less displacement than a single iliosacral screw in a transforaminal sacral fracture model.
No takes yet. Share an insight, caveat, or question.
Humphrey et al. (2010) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: