Answers are grounded in this paper and cite their sources.
Laboratory phosphorus (P) adsorption and desorption experiments were conducted on 9 substrata to evaluate their potential to remove P from sewage effluent. The substrata comprised 2 gravels used in constructed wetlands, Hawkesbury sandstone, and 6 steelworks by-products: granulated blast furnace slag, blast furnace slag, steel slag, fly ash, bottom ash, and coal wash. The studies involved ion-exchange experiments and calculation of Langmuir and Freundlich adsorption isotherms and column adsorption/desorption trials. The ability to adsorb P was then correlated to the physico-chemical attributes including X-ray fluorescence analyses of each substratum. High P adsorption capacities (>380 mg/kg) were shown for granulated blast furnace slag, blast furnace slag, and steel slag, as well as fly ash. All steelworks by-products had adsorption capacities greater than the constructed wetland gravels and Hawkesbury sandstone. The P adsorption capacities of the substrata were significantly correlated with Ca ( r 2 = 0 · 9206), Mg ( r 2 = 0 · 8681), pH ( r 2 = 0 · 7009), S ( r 2 = 0 · 6696), and Si ( r 2 = 0 · 6438) when fly ash was omitted from the analyses. Further research is recommended to evaluate the sustainability of using slags for P removal (as well as other contaminants present in wastewater), using full-scale constructed wetlands. Research should include an evaluation of any likely environmental impacts using leachability and toxicity studies.
No takes yet. Share an insight, caveat, or question.
R. A. Mann (1997) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: