Answers are grounded in this paper and cite their sources.
In experimental studies of dropwise condensation, it is difficult to isolate the effects of viscosity, surface tension, wettability, and subcooling because these factors often vary concurrently. To examine these effects at the individual-droplet scale, the growth, departure, and heat-transfer cycle of a single condensate droplet on a downward-facing cold surface was investigated using a coupled three-dimensional pseudopotential multiple-relaxation-time lattice Boltzmann model and finite-difference energy solver. Using this framework, nine cases defined by a four-factor, three-level orthogonal design were simulated to screen and compare the factor-associated response variations. Within the examined parameter space, two gravity-driven departure modes were identified: necking departure and direct departure. Range-based screening of the cycle-averaged whole-wall Nusselt-number response identified contact angle as the largest factor-associated variation (51.1% normalized range share), followed by surface tension (22.9%) and Jakob number (21.1%), whereas viscosity showed a much smaller range share (4.9%). Under the examined conditions, the mode-averaged whole-wall Nusselt numbers were 9.40 for necking-departure cases and 4.46 for direct-departure cases. Case 5 produced the highest cycle-averaged whole-wall value (14.148), whereas case 4 produced the lowest (1.762). Within the present controlled single-droplet configuration, the level-averaged whole-wall heat-transfer response decreased monotonically with contact angle and increased monotonically with surface tension over the tested levels, whereas the viscosity and Jakob-number responses were non-monotonic.
No takes yet. Share an insight, caveat, or question.
Mao et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: