Answers are grounded in this paper and cite their sources.
This paper presents a detailed analysis of four different powder recycling strategies for the metal additive manufacturing process focused on examining the efficacy of recycling Ti6Al4V alloy powder for the Laser-Based Powder Bed Fusion (LBPF) process. The study evaluates four distinct recycling strategies (A, B, C, D) and their impact on powder-saving mechanisms. The experimental methodology involves careful leftover powder sampling, implementation of recycling strategies and print cycle analysis from each recycling strategy. The results show that Strategies C and D exhibit the lowest powder waste, allowing 6 times the reuse of leftover powder and producing 384 parts with minimal powder waste at the end of the process. Strategy B also performs well, enabling 8 cycles and building 512 parts with only a small amount of powder wasted. Conversely, Strategy A yields the highest powder waste despite achieving the same number of cycles and prints. This proposed approach requires a total volume of 224,000 mm3 of powder for each build. This entails using 500g of gas-atomized Ti-6Al-4V powder, with an average particle size D90 of approximately 50 μm. This features a continuous mixing technique, wherein each build combines 50% virgin powder with 50% of the previously collected and sieved powder.
No takes yet. Share an insight, caveat, or question.
Gorji et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: