Answers are grounded in this paper and cite their sources.
Advances in semiconductor manufacturing are driving miniaturization; however, conventional Cu interconnects suffer from diffusion, electromigration, and oxidation at these scales. This study developed a copper–osmium [Cu(Os)] alloy metallization process to improve the thermal stability and reliability of integrated circuit conductors. Cu(Os) thin films deposited by co-sputtering exhibited excellent oxidation resistance, copper wettability, and Cu-diffusion blocking capability. In industrial applications, this will solve the reliability bottleneck caused by miniaturization and provide a technical solution for next-generation semiconductor manufacturing. Compared with pure Cu conductors that experience electromigration under high current densities, Cu diffusion into the dielectric layer, and oxidation at high temperatures, Cu(Os) exhibited superior performance owing to its higher melting point, higher conductivity, and excellent diffusion-blocking properties. After annealing at 740 °C for 1 h, the 300-nm-thick film exhibited a resistivity of 2.16 μΩ/cm. By comparison, the films annealed at 400 and 450 °C for 200 h had resistivities of 2.06 and 2.03 μΩ/cm, respectively, demonstrating the material’s excellent high-temperature oxidation resistance. When used as a seed layer and annealed at 600 °C, it achieved an adhesion strength of 52.3 ± 0.01 MPa, representing a 14- to 15-fold improvement over pure Cu. This same 600 °C treatment boosted the antibacterial efficacy to nearly 100%, outperforming pure Cu, while proving robust enough to maintain this efficacy at a thickness of just 8 nm. Hence, Cu(Os) is a promising material for semiconductors and medical applications, and it can be applied to microbump technology in advanced packaging of three-dimensional integrated circuits.
No takes yet. Share an insight, caveat, or question.
Chon-Hsin Lin (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: