Answers are grounded in this paper and cite their sources.
Electron Beam Powder Bed Fusion Additive Manufacturing (EB-PBF AM) has gained significant industrial recognition due to its advantages in geometric design flexibility, functional integration, and integrated forming. However, EB-PBF fabricated parts are subject to internal gas pores and lack-of-fusion defects accompanied by the formation of metastable α' martensite in microstructure. To address these challenges, this study employs hot isostatic pressing (HIP) post-processing for microstructure modification and defect elimination, systematically investigating the influence of HIP temperature (880°C, 920°C, 960°C) on microstructure evolution and tensile properties of Ti-6Al-4V alloy. Experimental results demonstrate that the α phase undergoes significant coarsening with increasing HIP temperature, accompanied by the formation of spheroidized α phase particles. Variant selection analysis reveals a monotonic decrease in variant selection intensity with ascending HIP temperatures. After HIP treatment at 920°C, the samples achieve optimal strength-ductility balance (ultimate tensile strength: 852 MPa, elongation: 18.2%), primarily attributed to their moderate α phase dimensions and β phase content. Interestingly, despite α phase coarsening after 960°C HIP compared to 920°C HIP, the strength exhibits a paradoxical increase, which is attributed to a higher proportion of hard oriented α and the coarsening interface phase for the strengthening of interfacial barriers.
No takes yet. Share an insight, caveat, or question.
Sheng et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: