Answers are grounded in this paper and cite their sources.
Inconel 718 is a corrosion-resistant and high strength nickel-based alloy with wide range of applications, including components for cryogenic tankage, liquid fueled rockets and casings for aircraft engines. The material is characterized by high hardness, high temperature strength, low thermal conductivity and high strength causing it extremely difficult to machine. Micro-Electrical Discharge Machining (Micro-EDM) is a non-conventional method that has a potential to overcome these restrictions for machining of Inconel 718. Response Surface Method (RSM) was used for modelling the tool Electrode Wear Rate (EWR) p on voltage are significant in controlling the tool electrode wear rate at 95% confidence level. An increase in voltage from 30 to 45 V and pulse on-time from 1 to 3 µs causes a linear decrease in EWR by 35%. Using response surface modeling, a 3 3 minimum EWR of 12.3184 µm /min and a maximum MRR of 37.2151 µm /min is obtained at a current of 1.07 A, pulse ontime of 4.44 µs, pulse off-time of 4.06 µs and voltage of 60 V.
No takes yet. Share an insight, caveat, or question.
Govindan Namboothiri Puthumana (2017) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: